NEWS

Industry News

Jan 07,2021

How to choose a stainless steel honeycomb panel manufacturer

The honeycomb panels produced by different stainless steel honeycomb panel manufacturers are very different. The honeycomb panels produced by large aluminum honeycomb panel manufacturers have the advantages of light weight, high strength, strong weather resistance, chemical resistance, etc., and the colors and weights are also different, so how to choose a high-quality aluminum honeycomb panel manufacturer? 1. Look at the strength of stainless steel honeycomb panel manufacturers. Some aluminum honeycomb panel manufacturers are actually secondary suppliers, with different purchase channels, or unable to check the quality control of production, so the quality of the honeycomb panels sold is of course different, while the honeycomb panels sold directly by their own formal enterprises Is different. Quality control is definitely better than second-hand sales. You can go to the actual factory to check to see if the factory has the relevant qualifications for the production of honeycombs and production machines and workshops. 2. Whether the technology and after-sales service are in place. Generally, the stronger the strength of the stainless steel honeycomb panel manufacturer, the stronger the after-sales ability. On the technical level, large stainless steel honeycomb panel manufacturers have a relatively large technical team, including daily distribution and delivery of honeycomb panels, installation guidance, on-site installation team, etc., whether after-sales claims can be resolved and timely replenishment in case of problems . Whether to provide timely technical support, etc. Usually, small manufacturers cannot do these things. 3. Check the quality of stainless steel honeycomb panel products. By basically comparing the products of other manufacturers, you can see whether the quality is good. Compare the color, weight, flatness, etc. of honeycomb panels. These comparisons seem simple, but the quality is easy to see. The above is how to choose a good stainless steel honeycomb panel manufacturer, I hope it will be helpful to you. Foshan Huarui Honeycomb Technology Co., Ltd. is a honeycomb panel manufacturer specializing in the production of aluminum honeycomb cores, aluminum honeycomb panels and metal honeycombs. The main products are: stainless steel honeycomb panels, energy absorbing devices, honeycomb aluminum panels, aluminum honeycomb panels, aluminum foam panels, shielding ventilation panels, lightweight materials, ceramic honeycomb panels, fabricated buildings, compartment panels, sound insulation panels, porous materials, fabricated partitions Relying on the business philosophy of "rooted technology, professional manufacturing and continuous improvement", Huarui has developed rapidly, especially in the research and development of microporous honeycombs and energy-absorbing honeycombs. It has its own customer base and is the trusted aluminum in China. Honeycomb panel manufacturers.

Jan 07,2021

Why stainless steel honeycomb panel is a high-quality choice for curtain wall decoration

The current main building materials have gradually evolved from the previous reinforced concrete to the current metal decorative panels, and the curtain walls of many office buildings have gradually used stainless steel honeycomb aluminum panels. So, why is stainless steel honeycomb panel a good choice for curtain wall decoration? The stainless steel honeycomb panel is a stainless steel honeycomb panel with high-strength stainless steel plates as the upper and lower plates, and the aluminum honeycomb core is formed by cold pressing. It is a high-end product of decorative materials. The stainless steel honeycomb panel curtain wall is more convenient to install, lighter in weight, more durable and safer in structure. The stainless steel honeycomb panel curtain wall has high flatness and is suitable for large panels. Stainless steel honeycomb decorative panels are more flexible and have many surface treatment methods. No matter which color or processing method you want, you can use the model to meet the needs of users. The center of the stainless steel honeycomb panel is a low-density aluminum hexagonal honeycomb. The honeycomb core used for stainless steel honeycomb panels is made by bonding multiple layers of aluminum foil together and unfolding them into a regular honeycomb shape. The honeycomb core hole wall is clear, without burrs, and faces the high-quality steel, thus forming a honeycomb stainless steel plate with good rigidity and high flatness. Greatly reduce the load and cost of the building, sound insulation, heat insulation, fireproof, waterproof, moisture-proof, no harmful gas release. The important thing is high flatness. Different processing methods and colors are the advantages of stainless steel honeycomb panels. It can be installed in many places, such as ceilings, partitions, etc.

Aug 31,2022

Requirements for the use of four types of centrifugal pumps

The first is the cleaning and inspection requirements of centrifugal pumps. Proper cleaning helps maintain the life of the pump and reduces unnecessary losses. Taking the stainless steel centrifugal pump as an example, the pump cannot be disassembled at will during the warranty period, and only the surface contaminants can be cleared; when the time exceeds the warranty period, the first thing to understand about the stainless steel centrifugal pump is that the end surface of the stainless steel centrifugal pump cannot be scratched or scratched during the cleaning process. Scratches, once washed with clean water, immediately apply lubricating oil on the surface of parts and equipment to ensure that it will not cause rust; the second is that the vertical mid-section of the pump casing cannot be disassembled, and cleaning should be avoided as much as possible; the third is the impeller Components and cooling water pipes must be cleaned. The second is the alignment requirements for stainless steel pipeline pumps. First, it is required that the drive shaft and the pump shaft, the drive shaft and the transmission shaft should be connected in accordance with the regulations. If there is no connection standard during the purchase period, Zhao Zheng must be familiar with the "Mechanical Equipment Installation Engineering Construction and Acceptance General" before. Specifications, and use it as a reference material is strictly required. These alignment requirements are all data generated through repeated experiments, and no one should change them at will.

Aug 31,2022

How to disassemble a centrifugal pump, attention to detail is the key

Have you ever disassembled a single stage centrifugal pump? If you want to disassemble such a huge piece of machinery, you must first have a comprehensive understanding of the centrifugal pump, and be able to know every detail inside. In fact, the single-stage centrifugal pump is different from the horizontal multi-stage centrifugal pump. As a kind of stainless steel centrifugal pump, its internal structure is relatively simple. The following Wenzhou Zhongnai Pump Valve will explain how to disassemble the single-stage centrifugal pump. First, cut off the power supply before disassembly to ensure safety during disassembly. Then close the outlet and inlet valves to isolate the external medium source to ensure the interference of unfamiliar foreign objects. At the same time, open the liquid release valve to release the residual pressure in the pump into the air, so that there is no impurities as much as possible. At this time, you can remove the motor base bolts, separate the motor from the pump body, and the first step of disassembly is successfully completed. The second is the disassembly of the pump body. The single-stage centrifugal pump is not as complicated as the stainless steel chemical centrifugal pump. First, remove the base bolts of the pump body and the fastening bolts of the back cover of the pump, and then remove the pump body. Tap the nut with a hammer to release the rust layer so that the foot bolt can be easily screwed. In addition, when the pump cover fastening bolt is located at the connection between the pump body and the pump cover, the corrosion phenomenon is particularly obvious. Because this position is relatively fragile, it cannot be hit with a hand hammer, but can only be rotated gently, which is difficult to disassemble.

Aug 31,2022

The role of pipeline centrifugal pump and installation skills

The correct installation methods for the pipeline centrifugal pump are as follows, because the working mechanism of the pipeline centrifugal pump is to allow the water or liquid to obtain kinetic energy under the action of centrifugal force through the action of the rapidly rotating impeller. Among them, the main points of the installation technology of the pipeline centrifugal pump are: the determination of the installation height of the pump, the middle distance between the water supply surface and the impeller component is the installation height, and the absolute vacuum height is generally indicated on the pump instruction manual and nameplate. At a standard atmospheric pressure and the water temperature is controlled between 20 and 30 degrees Celsius, the distance between the water surface of the water inlet and the section mouth gives the height of this vacuum, which is determined by experiment. However, the disadvantage of this method is that it does not consider the collocation of the size of the water flow and the suction pipe behind. Therefore, the installation height theoretically needs to deduct the lost energy to obtain the height of the vacuum, and then the remaining value is the real value, which can overcome the problems of terrain height and water absorption height in the actual situation. Otherwise the pressure provided by the pump will not pump the water up.

< 1...17181920 >
language
Submit
%{tishi_zhanwei}%

We will inform you as soon as we have new news

图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称

Fast Link

Home
About Tookes
Product Center
Application Area
News
Contact Us
CN

Business license

Product

Microporous Aluminum Honeycomb Core
High Strength Energy Absorbing Honeycomb
Stainless Steel Honeycomb Core
Aluminum Honeycomb Panel

Contact Us

Tel:+86 18825989996
E-mail:tookesi@163.com
Add:Panbian Industrial Park, Hongxing 
Village, Guanyao, Shishan Town, Nanhai District, Foshan City

Copyright © 2023 Foshan Tookes Honeycomb Technology Co., Ltd.        Power by www.300.cn      SEO